WELCOME TO TESTLINK 테스트링크 홈페이지에 오신것을 환영합니다.

로그인

barbar

QUICK ICONS

라인

  • 공지사항
  • 문의하기
  • 최근본상품
  • 상품검색

PicoScope 6000 Series  

PicoScope 6000 Series

기본 정보
판매가 문의
상품요약정보 HIGH-PERFORMANCE USB OSCILLOSCOPES
제조사 PICO
수량 수량증가수량감소
배송
상품 목록
상품 정보 가격 삭제


Overview


PicoScope® 6000 시리즈 

HIGH-PERFORMANCE USB OSCILLOSCOPES

고성능 USB 오실로스코프


Key features

▶ 4채널

500 MHz 대역폭

5 GS/s 실시간 샘플링

2 GS 울트라 딥 메모리

▶ 초당 170,000 파형 

임의 파형 발생기 (AWG)

USB 3.0 통신

▶ 최고의 대역폭, 샘플링 속도, 메모리

하드웨어 가속 엔진 (HAL4)

신호 무결성

USB 연결


PicoScope 6000시리즈는 최고급 USB 오실로스코프입니다. 고급 기능인 시리얼 디코딩, 마스크제한 테스트, 세그먼트 메모리가 표준으로 포함됩니다.






하드웨어 가속 엔진(HAL4)

 


하드웨어 가속엔진은 초당 1000만 샘플을 모으는동안에도 빠른 스크린 업데이트를 보장합니다.



Some oscilloscopes struggle when you enable deep memory; the screen update rate slows and controls become unresponsive.

대부분 오실로스코프들은 딥 메모리를 활성화할때 많은 어려움이 발생합니다; 스크린 업데이트가 늦어지거나 응답오류가 생깁니다.


PicoScope 6000시리즈는 오실로스코프에 내장되어있는 하드웨어 가속엔진을 사용해 이러한 한계점을 극복합니다.

 Its massively parallel design effectively creates the waveform image to be displayed on the PC screen and allows the continuous capture and display to the screen of 2.5 billion samples every second.

대규모 병렬 설계로 PC화면에 표시할 파형 이미지를 효과적으로 생성하고 초당 25억 샘플 화면에 연속캡쳐와 디스플레이가 가능합니다.


PicoScope oscilloscopes manage deep memory better than competing oscilloscopes, both PC-based and benchtop.

PicoScope 오실로스코프는 다른 경쟁사 PC형 혹은 벤치형 오실로스코프보다 더 나은 딥 메모리를 관리합니다. 

The PicoScope 6000 Series is fitted with fourth-generation hardware acceleration (HAL4).

PicoScope6000시리즈는 4세대 하드웨어 가속 엔진이 장착되어있습니다.

 This speeds up areas of oscilloscope operation such as allowing waveform update rates in excess of 170 000 waveforms per second and the segmented memory/rapid trigger modes. 

이를 통해 초당 170,000개 이상의 파형 업데이트 속도와 세그먼트화 된 메모리 / 빠른 트리거 모드와 같은 오실로스코프 작동 영역의 속도를

높힐 수 있습니다.

The hardware acceleration engine ensures that any concerns about the USB connection or PC processor performance being a bottleneck are eliminated.

하드웨어 가속엔진은 병목현상인 USB 연결 혹은 PC프로세서 성능에 대한 우려를 보장합니다.


17만개의 파형

 

오실스코프의 성능을 평가할때 가장 중요한것은 초당 파형으로 표현되는 파형 업데이트 속도입니다.

샘플링 속도는 오실로스코프가 한 파형 혹은 주기내에서 입력 신호를 샘플링하는 빈도를 나타내지만 캡쳐속도는 오실로스코프가 파형을

획득하는 속도입니다.

Oscilloscopes with high waveform capture rates provide better visual insight into signal behavior and dramatically increase the probability that the oscilloscope will quickly capture transient anomalies such as jitter, runt pulses and glitches – that you may not even know exist.

파형 캡쳐속도가 높은 오실로스코프는 신호 동작에 더 나은 시각적 통찰력을 제공하고 오실로스코프가 지터, 런트펄스, 글리치 같은 

일시적인 문제를 빠르게 캡쳐하는 확률이 올라갑니다.

PicoScope deep memory oscilloscopes use hardware acceleration to achieve over 170 000 waveforms per second.

PicoScope 딥 메모리 오실로스코프는 하드웨어 가속 엔진을 통해 무려 초당 17만 파형을 달성합니다.



파형 버퍼와 네비게이터


Ever spotted a glitch on a waveform, but by the time you’ve stopped the scope it has gone? With PicoScope you no longer need to worry about missing glitches or other transient events.

파형에서 글리치를 발견했지만 스코프를 중지했을때 글리치가 사라졌습니까? PicoScope를 사용하면 더이상 글리치나 다른 과도현상을

놓칠 걱정할 필요가 없습니다.

 PicoScope can store the last ten thousand oscilloscope or spectrum waveforms in its circular waveform buffer.

PicoScope는 원형 파형 버퍼에 마지막 1만개의 오실로스코프 혹은 스펙트럼 파형을 저장할 수 있습니다.

The buffer navigator provides an efficient way of navigating and searching through waveforms, effectively letting you turn back time.

버퍼 탐색기는 파형을 탐색하고 검색하는 효율적인 방법을 제공하여 효과적으로 시간을 되돌릴 수 있도록 합니다.

 Tools such as mask limit testing can also be used to scan through each waveform in the buffer looking for mask violations.

마스크 제한 테스트와 같은 도구를 사용하여 버퍼의 각 파형을 스캔하여 마스크 위반을 찾을 수 있습니다.


신호 무결성

 


 


Most oscilloscopes are built down to a price. PicoScopes are built up to a specification.

대부분 오실로스코프들의 가격은 사양에 맞춰져 있습니다.

Careful front-end design and shielding reduces noise, crosstalk and harmonic distortion. Years of oscilloscope design experience can be seen in improved bandwidth flatness and low distortion.

조심스러운 전면디자인이과 노이즈, 누화, 고조파 왜곡을 줄여주는 설계. 수년의 세월이 지나며 오실로스코프 대역폭 평탄의 향상과

낮은 왜곡으로 설계되고있습니다.

We are proud of the dynamic performance of our products and, unlike most oscilloscope manufacturers, publish our specifications in detail. The result is simple: when you probe a circuit, you can trust in the waveform you see on the screen.

제품의 동적 성능을 자랑스럽게 생각하며 대부분의 오실로스코프 제조업체와 달리 사양을 자세하게 게시합니다.

결과는 간단합니다 : 회로를 관찰할때 화면에 표시되는 파형을 신뢰할 수 있습니다.


USB 연결성

 



The USB connection not only allows high-speed data acquisition and transfer, but also makes printing, copying, saving, and emailing your data from the field quick and easy.

USB 연결은 고속 데이터 수집과 전송 뿐만아니라 데이터를 빠르고 쉽게 프린팅, 복사, 저장, 이메일링을 할 수 있습니다.

PicoScope 6000 Series oscilloscopes feature a SuperSpeed USB 3.0 connection, making the already-optimized process of data transfer and waveform update rates even faster. 

PicoScope6000시리즈 오실로스코프는 SuperSpeed USB 3.0 연결 기능으로 이미 최적화된 데이터 전송 프로세스와 파형 업데이트 속도가

훨씬 빨라집니다.

PicoScope6000시리즈의 오실로스코프는 SuperSpeed USB3.0의 성능을 제공하여, 이미 최적화된 데이터 전송 프로세스와 파형 업데이트

속도를 더 빠르게 합니다.

Further benefits of a USB 3.0 connection include faster saving of waveforms and faster gap-free continuous streaming of over 150 MS/s when using the SDK, while the scope is still backward-compatible with older USB systems.

USB3.0연결의 또다른 이점으로 SDK를 사용할때 파형을 더 빠르게 저장하고 150MS/s이상의 갭없는 연속 스트리밍이 더 빨라지는 반면

스코프는 이전 USB시스템과 여전히 역 호환됩니다.


시리얼 버스 디코딩과 스펙트럼 분석


 

PicoScope can decode 1-Wire, ARINC 429, CAN & CAN-FD, DCC, DMX512, Ethernet 10Base-T and 100Base-TX,  FlexRay, I²C, I²S, LIN, PS/2, Manchester, MODBUS, SENT, SPI, UART (RS-232 / RS-422 / RS-485), and USB 1.1 protocol data as standard, with more protocols in development and available in the future with free-of-charge software upgrades.

PicoScope는 1-WireARINC 429CAN & CAN-FDDCC, DMX512, Ethernet 10Base-T and 100Base-TX,  FlexRay, I²C, I²S, LIN, PS/2, ManchesterMODBUSSENTSPIUART (RS-232 / RS-422 / RS-485)를 디코딩할 수 있습니다. 프로토콜 데이터가 표준으로 제공되며, 더 많은 프로토콜이 개발중이며, 더 많은 프로토콜이 개발중이고 미래에 무료 소프트웨어 업그레이드를 통해 제공됩니다.


Graph format shows the decoded data (in hex, binary, decimal or ASCII) in a data bus timing format, beneath the waveform on a common time axis, with error frames marked in red. These frames can be zoomed to investigate noise or signal integrity issues.

그래프 형태는 데이터 버스 타이밍 형식으로 디코딩된 데이터 [16진수, 바이너리, 10진수 혹은 ASCI]를 공통시간축의 파형 아래에 빨간색으로

표시된 오류 프레임과 함께 표시합니다.

이 프레임들은 노이즈나 신호 무결성을 문제를 조사 하기위해 확대를 할 수 있습니다.

Table format shows a list of the decoded frames, including the data and all flags and identifiers. You can set up filtering conditions to display only the frames you are interested in or search for frames with specified properties.

테이블 형태는 데이터와 모든 플래그 그리고 식별을 포함해 디코딩괸 프레임 폭록을 보여주며 관심있는 프레임만 표시하거나 지정된 속성이

있는 프레임을 검색하도록 필터링 조건을 설정할 수 있습니다.

 

 The statistics option reveals more detail about the physical layer such as frame times and voltage levels. PicoScope can also import a spreadsheet to decode the data into user-defined text strings.

통계 옵션은 프레임 시간과 전압 레벨과 같은 물리적인 층에 대한 자세한 정보를 표시합니다.

PicoScope는 또한 스프레드 시트를 통해 데이터를 사용아 정의 텍스트 문자열로 디코딩할 수 있습니다.

 

One waveform, millions of measurements.

하나의 파형, 수백만 측정

Measurement of waveform pulses and cycles is key to verification of the performance of electrical and electronic devices.

펄스 파형과 사이클 측정은 전기 와 전자 장비 성능을 검증하기에 중요한 역할을 합니다.

DeepMeasure delivers automatic measurements of important waveform parameters on up to a million waveform cycles with each triggered acquisition. Results can be easily sorted, analyzed and correlated with the waveform display.

측정은 트리거된 각 수집에서 최대 백만 파형 사이클에서 중요한 파형 파라미터의 자동 측정을 제공합니다.

결과는 간단히 분류됩니다, 파형 디스플레이와 분석되고 상호 연관됩니다.



Mask limit testing마스크 제한 테스트

 


 

Mask limit testing allows you to compare live signals against known good signals, and is designed for production and debugging environments. 

마스크 제한 테스트를 통해 라이브 신호를 알려진 일반 신호와 비교할 수 있습니다, 그리고 이는 프로덕션과 디버깅 환경을 위해 설계되었습니다.

Simply capture a known good signal, draw a mask around it, and then attach the system under test. PicoScope will check for mask violations and perform pass/fail testing, capture intermittent glitches, and can show a failure count and other statistics in the Measurements window.

알려진 일반신호를 캡쳐하고 주변에 마스크를 그린 다음 테스트중인 시스템을 연결하기만 하면 됩니다.

PicoScope는 마스크 위반을 확인하고 pass/fail 테스트를 수행하고 간헐적인 글리치를 캡쳐하며 측정 윈도우에 실패 횟수와 기타 통계를

표시할 수 있습니다.



FFT 스펙트럼 분석

 

The spectrum view plots amplitude against frequency and is ideal for finding noise, crosstalk or distortion in signals.

스펙트럼 뷰는 주파수에대한 진폭을 표시하며 신호의 노이즈, 누화, 왜곡을 찾는데 이상적입니다.

 The spectrum analyzer in PicoScope is of the Fast Fourier Transform (FFT) type which, unlike a traditional swept spectrum analyzer, can display the spectrum of a single, non-repeating waveform.

PicoScope안에 있는 스펙트럼 분석은 FFT타입으로 전통적인 스윕 스펙트럼 분석기와는 다릅니다, 반복되지 않는 파형과 단일 스펙트럼을

디스플레이할 수 있습니다.

A full range of settings gives you control over the number of spectrum bands (FFT bins), window types, scaling (including log/log) and display modes (instantaneous, average, or peak-hold).

전체 범위의 설정을 통해 스펙트럼 밴드[FFT bins], 윈도우 타입, 스케일링[ log/log 포함] 그리고 디스플레이 모드[순간, 평균, 피크 홀드] 

를 제어할 수 있습니다.

You can display multiple spectrum views alongside oscilloscope views of the same data. 

동일한 데이터의 스펙트럼 뷰와 오실로스코프 뷰를 같이 디스플레이할 수 있습니다.



A comprehensive set of automatic frequency-domain measurements can be added to the display, including THD, THD+N, SNR, SINAD and IMD.

THD, THD+N, SNR, SINAD와 IMD를 포함해 포괄적인 자동 주파수 도메인 측정 세트를 디스플레이에 추가될 수 있습니다.

 A mask limit test can be applied to a spectrum and you can even use the AWG and spectrum mode together to perform swept scalar network analysis.

마스크 제한 테스트는 스펙트럼에 적용되며  AWG사용, 스펙트럼 모드를 함께 사용해  스윕 스칼라 네트워크 분석을 할 수 있습니다.



임의파형과 함수 발생기

 


 ll PicoScope 6000 units have a built-in 20 MHz function generator (sine, square, triangle, DC level, white noise, PRBS etc.)

PicoScope 6000은 20MHz의 함수발생기가 내장되어있습니다[sine, square, triangle, DC level, PRBS, 등등].


As well as basic controls to set level, offset and frequency, more advanced controls allow you to sweep over a range of frequencies.

레벨, 오프셋, 주파수를 설정하는 기본 컨트롤뿐만 아니라 고급 컨트롤을 사용해 다양한 주파수를 스위핑할 수 있습니다.


 Combined with the spectrum peak hold option this makes a powerful tool for testing amplifier and filter responses.

Trigger tools allow one or more cycles of a waveform to be output when various conditions are met such as the scope triggering or a mask limit test failing.

스펙트럼 피크 홀드 옵션과 결합하면 증폭기와 필터 응답 테스트를 위한 강력한 도구가 됩니다.


트리거 툴을 사용하면 스코프 트리거링 혹은 마스크 제한 테스트 실패와 같은 다양한 조건이 충족 될때 하나 이상의 파형 사이클을

출력할 수 있습니다.

PicoScope 6000D models also include a 12 bit 200 MS/s arbitrary waveform generator (AWG). AWG waveforms can be created or edited using the built-in AWG editor, imported from oscilloscope traces, or loaded from a spreadsheet.

PicoScope 6000D모델은 12b비트 200MS/s 임의파형 발생기[AWG]가 내장되어 있습니다.

AWG파형은 내장된 AWG를 활용해 생성 또는 편집하거나, 오실로스코프 트레이스에서 가져오거나, 스프레드 시트에서 가져올 수 있습니다.




향상된 디지털 트리거링

The majority of digital oscilloscopes still use an analog trigger architecture based on comparators.

대부분의 오실로스코프들은 비교기를 기반으로하는 아날로그 트리거를 사용하고 있습니다.


 This causes time and amplitude errors that cannot always be calibrated out and often limits the trigger sensitivity at high bandwidths.

하지만 이것은 언제나 보정할 수 없는 시간과 진폭 오류가 발생하고 가끔 높은 대역폭에 트리가 감도가 제한됩니다.

 


In 1991 Pico pioneered the use of fully digital triggering using the actual digitized data. This technique reduces trigger errors and allows our oscilloscopes to trigger on the smallest signals, even at the full bandwidth. Trigger levels and hysteresis can be set with high precision and resolution.

1991년에 Pico는 실제로 디지털화된 데이터를 사용하여 완전 디지털 트리거링의 사용을 개척했습니다. 이 기술을 트리거 에러를 줄여주며

오실로 스코프에 대역폭이 최대임에도 불구하고 매우 작은 신호들을 트리거할 수 있습니다.


트리거 레벨과 히스테리시스는 고정밀 분해능으로 세팅할 수 있습니다.

The reduced rearm delay provided by digital triggering, together with segmented memory, allows the capture of a new waveform every microsecond until the buffer is full.



The PicoScope 6000 Series offers an industry-leading set of advanced triggers including pulse width, runt pulse, windowed, logic and dropout

PicoScope6000 시리즈는 펄스폭, 런트 펄스, 윈도우, 로직, 드롭 아웃을 포함한 업계 최고의 고급 트리거를 제공합니다.



Alarms

 


PicoScope can be programmed to execute actions when certain events occur.

PicoScope는 오류가 발생하면 즉시 종료되도록 설계되었습니다.

The events that can trigger an alarm include mask limit fails, trigger events and buffers full.

경보를 트리거할 수 있는 마스크 제한 실패, 트리거 이벤트와 버퍼 가득참같은 이벤트가 있습니다.

The actions that PicoScope can execute include saving a file, playing a sound, executing a program or triggering the signal generator / AWG.

PicoScope는 파일을 저장하고, 사운드가 켜지며, 함수발생기/AWG의 트리거 혹은 프로그램을 즉시 종료시킵니다.


Alarms, coupled with mask limit testing, help create a powerful and time saving waveform monitoring tool. 

알람, 마스크 제한 테스트와 결합은 시간을 절약하는 파형 모니터링 툴을 만드는데 도움이 됩니다.


Capture a known good signal, auto generate a mask around it and then use the alarms to automatically save any waveform (complete with a time/date stamp) that does not meet specification.  

알려진 좋은 신호를 캡쳐하고 주변에 마스크를 자동 생성한 다음 알람을 사용하여 사양을 충족하지 않는 파형[완성된 시감/날짜 스탬프]을

자동으로 저장합니다.


 



고급 디스플레이

 


PicoScope software dedicates almost all of the display area to the waveform. This ensures that the maximum amount of data is seen at once. The viewing area is much bigger and of a higher resolution than with a traditional benchtop scope.

PicoScope 소프트웨어는 대부분 모든 화면 점위를  파형에 전송합니다.

이렇게하면 한번에 최대 데이터양을 볼 수 있습니다.

보기 영역은 기존 벤치탑 스코프보다 훨씬 크고 해상도도 높습니다.


With a large display area available, you can also create a customizable split-screen display, and view multiple channels or different views of the same signal at the same time. 

넓은 디스플레이 영역 활성화와 함께, 사용자 설정 가능한 분할 화면도 생성할 수 있으며, 동시에 동일한 신호의 여러 채널 혹은 다른 보기를

볼 수 있습니다.

As the example shows, the software can even show multiple oscilloscope and spectrum analyzer traces at once. Additionally, each waveform shown works with individual zoom, pan, and filter settings for ultimate flexibility.

예시로 보시는것처럼, 소프트웨어를 통해 다중 오실로스코프와 스펙트럼 분석기 트레이스를 한번에 표시할 수 있습니다.

추가적으로, 표시된 각 파형은 개별 줌, 뛰어난 유연성을 위한 필터링 세팅과 함께 작동합니다.


The PicoScope software can be controlled by mouse, touchscreen or keyboard shortcuts.

PicoScope 소프트웨어는 마우스, 터치스크린 혹은 키보드 단축기로 조작할 수 있습니다.




FFT 스펙트럼 분석기

 

PicoScope 6을 프로그래밍하여 특정 이벤트가 발생할 때 작업을 실행할 수 있습니다. 알람을 트리거할 수 있는 이벤트에는 마스크 제한 실패, 트리거 이벤트 및 버퍼 가득 참이 포함됩니다. PicoScope 6 작업에는 파일 저장, 사운드 재생, 프로그램 실행 및 임의 파형 생성기 트리거가 포함됩니다.




오실로스코프 소프트 웨어의 사용자 정의 프로브

 


 

The custom probes feature allows you to correct for gain, attenuation, offsets and nonlinearities in probes, sensors or transducers that you connect to the oscilloscope. 

사용자 정의 프로브 기능을 사용하면 오실로스코프에 연결하는 프로브, 센서 혹은 변환기의 감쇠, 오프셋, 획득, 비선형 선을

수정할 수 있습니다.

This could be used to scale the output of a current probe so that it correctly displays amperes. A more advanced use would be to scale the output of a nonlinear temperature sensor using the table lookup function.

전류 프로브의 출력을 조정하여 암페어를 정확하게 디스플레이합니다. 더 고급 기능으로 테이블 조회 기능을 사용하여

비선형 온도 센서 출력을 조정할 수 있습니다.



Definitions for standard Pico-supplied oscilloscope probes and current clamps are included. User-created probes may be saved for later use.

Pico 제공 오실로스코프와 전류 클램프에 대한 정의가 포함되어 있습니다.

유저가 만든 프로브는 나중을 위해 저장할 수 있습니다.




 데이터 고속 수집과 디지타이징


 

 

The software development kit (SDK) allows you to write your own software and includes drivers for Microsoft Windows, macOS and Linux (including a beta version for Raspberry Pi).

소프트웨어 개발 키트[SDK]는 유저만의 소프트웨어를 작성할 수 있으며 마이크로 소프트 윈도우, macOS, Linux 드라이버를 포함합니다.

Example code shows how to interface to third-party software packages such as Microsoft Excel, National Instruments LabVIEW and MathWorks MATLAB.

예시 코드는 제3자인 마이크로 소프트 엑셀, LavBIEW, MathWorks MATLAB 같은 소프트웨어 패키지와 통신하는 법을 보여줍니다.

The drivers support USB data streaming, a mode that captures gap-free continuous data over USB direct to the PC’s RAM or hard disk at rates of up to 150 MS/s and capture size is limited only by available PC storage. 

드라이버는 USB를 통해 최대 150MS/s로 PC의 RAM 또는 하드디스크로 직접 연속 데이터를 캡쳐하는 모드인 USB 데이터 스트리밍을 지원하며

캡쳐 크기는 사용 가능한 PC 저장에 의해서만 제한됩니다.

Sampling rates in streaming mode are subject to PC specifications and application loading.

스트리밍 모드의 샘플링 속도는 PC사양과 애플리케이션 로드에 따라 다릅니다.




PicoScope 6 소프트웨어

 


 




PicoScope 6000 Specifications

Oscilloscope – vertical
ModelPicoScope 6402CPicoScope 6402DPicoScope 6403CPicoScope 6403DPicoScope 6404CPicoScope 6404D
Input channels4
Bandwidth*
(-3 dB)
250 MHz
(200 MHz ±50 mV range)
350 MHz
(250 MHz ±50 mV range)
500 MHz
(all ranges)
Hardware bandwidth limiterSwitchable, 20 MHzSwitchable, 25 MHz
Rise time (10%–90%, calculated)1.4 ns (50 mV range 1.8 ns)1.0 ns (50 mV range 1.4 ns)0.7 ns (all ranges)
Input typeSingle-ended, BNC connector
Resolution8 bits
Enhanced resolution12 bits
Input sensitivity10 mV/div to 4 V/div at x1 zoom (1 MΩ input)
10 mV/div to 1 V/div at x1 zoom (50 Ω input)
Input ranges (full scale)±50 mV to ±20 V, in 9 ranges (1 MΩ input)
±50 mV to ±5 V, in 7 ranges (50 Ω input)
Input couplingAC, DC or 50 Ω DC, software-selectable
Input characteristics1 MΩ in parallel with 15 pF (AC or DC coupling) or 50 Ω (DC coupling)1 MΩ in parallel with 10 pF (AC or DC coupling) or 50 Ω (DC coupling)
DC accuracy±3% of full scale
Analog offset range (vertical position adjust)±50 mV to ±200 mV ranges
±500 mV range
±1 V range
±2 V range
±5 V range
±10 V range
±20 V
±0.5 V
±2.5 V
±2.5 V
±2.5 V
±20 V (50 Ω ±0.5 V)
±20 V
±20 V
±2 V
±10 V (50 Ω ±5 V)
±10 V (50 Ω ±4.5 V)
±10 V (50 Ω ±3.5 V)
±35 V (50 Ω ±0.5 V)
±30 V
±20 V
Overvoltage protection±100 V to ground (1 MΩ inputs), 5.5 V RMS (50 Ω inputs)

*Quoted bandwidth is with supplied probes or at BNC when 50 Ω impedance selected

Oscilloscope – horizontal
Maximum sampling rate
(single-shot)
1 channel in use: 5 GS/s
2 channels in use: 2.5 GS/s (using A+C, A+D, B+C, B+D)
3 or 4 channels in use: 1.25 GS/s
Maximum sampling rate (repetitive signals, ETS mode)50 GS/s
Maximum sampling rate
(continuous streaming mode)
19.53 MS/s using PicoScope. >150 MS/s using the supplied SDK (PC-dependent)
Timebase ranges
Real-time
ETS

1 ns/div to 5000 s/div
50 ps/div to 100 ns/div
Buffer memory
(shared between active channels)
256 MS512 MS512 MS1 GS1 GS2 GS
Streaming buffer memory (PicoScope)100 MS
Streaming buffer memory (SDK)Up to available PC memory
Maximum buffer segments (PicoScope)10,000
Maximum buffer segments (using SDK)250,000500,000500,0001,000,0001,000,0002,000,000
Maximum waveforms per second170,000 wfm/s (PC-dependent)
Timebase accuracy±2 ppm
Timebase ageing1 ppm per year
Dynamic performance (typical)
Crosstalk17 000:1 typical at 20 MHz
1000:1 typical at full bandwidth
5600:1 typical at 20 MHz
560:1 typical at full bandwidth
Harmonic distortion–55 dB typical–54 dB typical
SFDR60 dB typical55 dB typical
Noise200 μV RMS (50 mV range)320 μV RMS (50 mV range)
Triggering (general)
Trigger modesFree run, single, repeat, auto, rapid, ETS
Maximum pre-trigger captureUp to 100% of capture size
Maximum post-trigger delayUp to 4 billion samples
Maximum trigger rateUp to 10,000 waveforms in a 10 ms burst
Rearm timeLess than 1 µs on fastest timebase
Pulse width triggerSettable with 1 sample resolution from 1 sample (minimum 200 ps) up to 4 billion sample intervals
Triggering (analog inputs)
Trigger typesRising or falling edge with adjustable hysteresis, pulse width, window, window pulse width, dropout, window dropout, delay, interval, level, logic, runt pulse
Trigger sourcesChannels A to D, AUX
Trigger levelAdjustable over whole of selected voltage range
Trigger sensitivity1 LSB accuracy up to full bandwidth of scope
Auxiliary trigger input (AUX)
Trigger typesEdge, pulse width, dropout, interval, logic
Input characteristics50 Ω ±1%, DC coupled
Input typeRear-panel BNC, shared with reference clock input
Threshold range±1 V
Bandwidth25 MHz
Overvoltage protection±5 V (DC + AC peak)
Reference clock input (SDK only)
Clock input characteristics50 Ω, BNC, ±1 V, DC coupled
Frequency range5, 10, 20, 25 MHz, user-selectable
ConnectorRear-panel BNC, shared with AUX trigger
LevelAdjustable threshold, ±1 V
Overvoltage protection±5 V
Probe compensation output
Impedance600 Ω
Frequency1 kHz square wave
Level2 V pk–pk
Function generator
Standard waveforms
C models
D models

Sine, square, triangle, DC level
As C models plus ramp (up/down), sin (x)/x, Gaussian, half-sine, white noise, PRBS
Frequency rangeDC to 20 MHz
Frequency accuracySame as scope timebase accuracy
Frequency resolution< 0.05 Hz
Sweep modesUp, down, dual
Signal generator triggeringScope, manual, or AUX input; programmable number of cycles from 1 to 1 billion
Amplitude range250 mV to 2 V pk
Offset adjustment±1 V
Output voltage limits–2.5 V to +2.5 V
DC accuracy±1% of full scale
Connector typeRear-panel BNC
Output impedance50 Ω
Overvoltage protection±5 V
Function generator and arbitrary waveform generator
Update raten/a200 MS/sn/a200 MS/sn/a200 MS/s
Buffer sizen/a64 kSn/a64 kSn/a64 kS
Resolutionn/a12 bitsn/a12 bitsn/a12 bits
Spectrum analyzer
Frequency rangeDC to 250 MHzDC to 350 MHzDC to 500 MHz
Display modesMagnitude, peak hold, average
Windowing functionsRectangular, Gaussian, triangular, Blackman, Blackman–Harris, Hamming, Hann, flat-top
Number of FFT pointsFrom 128 to 1 048 576
Scale / unitsX axis : linear or log 10
Y axis : logarithmic (dbV, dBu, dBm, arbitrary) or linear (volts)
Math channels
General functions−x, x+y, x−y, x*y, x/y, x^y, sqrt, exp, ln, log, abs, norm, sign, sin, cos, tan, arcsin, arccos, arctan, sinh, cosh, tanh, derivative, integral, delay
Filter functionsLow pass, high pass, band stop, band pass
Graphing functionsFrequency, duty cycle
Multi-waveform functionsMin, max, average, peak
OperandsInput channel, reference waveforms, time, constants, pi
Automatic measurements
Scope modeAC RMS, true RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak to peak, rise time, rising rate.
Spectrum modeFrequency at peak, amplitude at peak, average amplitude at peak, total power, THD %, THD dB, THD+N, SFDR, SINAD, SNR, IMD
StatisticsMinimum, maximum, average and standard deviation
Serial decoding
Protocols1-Wire, ARINC 429, CAN and CAN-FD, DCC, DMX512, Ethernet (10Base-T, 100Base-TX), FlexRay, I²C, I²S, LIN, PS/2, SENT, SPI, UART/RS-232, USB 1.0
InputsAll input channels with any mixture of protocols
Mask limit testing
Mask generationAuto generate from captured waveform, manual drawing, manual coordinate entry
ActionsHighlight on screen, select in buffer overview, activate alarm
StatisticsPass/fail, failure count, total count
Alarms
Initiating eventsCapture, buffer full, mask fail
Alarm actionsBeep, play sound, stop/restart capture, run executable, save current buffer/all buffers, trigger signal generator
Display
InterpolationLinear or sin(x)/x
Persistence modesDigital color, analog intensity, fast, custom
Data export
Output file formatsBMP, CSV, GIF, JPG, MATLAB 4, PDF, PNG, PicoScope data, PicoScope settings, TXT
Output functionsCopy to clipboard, print
Environmental
Temperature range (operating)0 °C to 40 °C
Temperature range (stated accuracy)20 °C to 30 °C
Temperature range (storage)–20 °C to +60 °C
Humidity range (operating)5% to 80% RH non-condensing
Humidity range (storage)5% to 95% RH non-condensing
Physical properties
Dimensions255 x 170 x 40 mm
(approx 10 x 6.7 x 1.6 in)
280 x 170 x 40 mm
(approx 11 x 6.7 x 1.6 in)
Weight1 kg
(approx 2 lb  3 oz)
1.3 kg
(approx 2 lb  14 oz)
Software
Windows softwarePicoScope for Windows
Software development kit (SDK)
Windows 7, 8 or 10 recommended (read more)
macOS softwarePicoScope for macOS (beta: feature list)
Software development kit (SDK)
OS versions: see release notes
Linux softwarePicoScope for Linux (beta: feature list)
Software development kit (SDK)
See Linux Software & Drivers for details of supported distributions
LanguagesChinese (simplified), Chinese (traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Romanian, Russian, Spanish, Swedish, Turkish
General
Additional hardware (supplied)USB 3.0 cable, universal mains (AC) power supply, mains lead (power cord), carry case, user manuals, probes in probe case:
PS6402C/D & PS6403C/D - TA150
PS6404C/D - TA133
PC requirementsMicrosoft Windows 7, 8 and 10
PC interfaceUSB 3.0 (USB 2.0 and USB 1.1 compatible; USB 1.1 not recommended)
Power supply
AC adaptor
12 V @ 4 A
External adaptor supplied (suitable for USA, UK, Europe and Australasia)
Safety approvalsEuropean LVD standard
EMC approvalsEuropean EMC standard
FCC Rules Part 15 Class A
Environmental approvalsRoHS compliant
Total satisfaction guaranteeIn the event that this product does not fully meet your requirements you can return it for an exchange or refund. To claim, the product must be returned in good condition within 14 days.
Warranty5 years

Powerful tools provide endless options

 Your PicoScope is provided with many powerful tools to help you acquire and analyze waveforms. While these tools can be used on their own, the real power of PicoScope lies in the way they have been designed to work together.

As an example, the rapid trigger mode allows you to collect 10 000 waveforms in a few milliseconds with minimal dead time between them. Manually searching through these waveforms would be time-consuming, so just pick a waveform you are happy with and let the mask tools scan through for you. When done, the measurements will tell you how many have failed and the buffer navigator allows you to hide the good waveforms and just display the problem ones. This video shows you how.

Perhaps instead you want to plot changing duty cycle as a graph? How about outputting a waveform from the AWG and also automatically saving the waveform to disk when a trigger condition is met? With the power of PicoScope the possibilities are almost endless. To find out even more about the capabilities of PicoScope software, visit our A to Z of PC Oscilloscopes.

상품 상세 정보
상품명 PicoScope 6000 Series
판매가 문의
상품요약정보 HIGH-PERFORMANCE USB OSCILLOSCOPES
제조사 PICO
수량 수량증가수량감소

상품 Q&A

상품문의하기 모두보기

게시물이 없습니다

판매자 정보



WORLD SHIPPING

PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :

GO
close